Skip to content Bed Sensor System with transmitter for Interlogix and Qolsys Alarm

Original price $179.00 - Original price $179.00
Original price
$179.00 - $179.00
Current price $179.00

The ADC-BOS-BC23-GE is a bed sensor system with Interlogix/Qolsys transmitter for secure independent home care and senior living. The ADC-BOS-BC23-GE is intelligent enough to monitor the overall quality of life and provides a critical safety net. Using discreet wireless sensors throughout the client's living area, the wellness suite of products grants caregivers real-time insight into each client's current conditions as well as potential emergency problems.

This device requires an account, your partner will need to work with you to add devices to your account.

Alarms247 offers DIY monitoring packages to support these devices.

Wellness Monitoring:

  • Nighttime Falls
  • Sleep Patterns & Sleeplessness
  • Sedentary Lifestyles or Wandering
  • Odd & Erratic Eating Habits
  • Infrequent or Excessive Bathroom Activities
  • Medication Adherence

Product Specifications:

  • Mat Dimensions (L x W x D): 30 x 11 x 0.3 in.
  • Cable: Gray, 18in, 26 AWG, 4 conductors sheathed, terminated with RJ9 connector
  • Electronic Enclosure: White, 3.5 in. x 2.5 in. x 0.8 in. ABS plastic
  • Electronic Signaling: Battery-powered filter circuit with integrated 319.5 MHz (crystal-controlled) Interlogix/Qolsys-compatible transmitter with 64-minute supervisory interval
  • Activation Weight: Minimum 50 lb. subject directly above mat
  • Sensing Interface: Filtered, normally open (i.e. when not occupied), momentary contact switch
  • Compatibility: Interlogix Simon XT/XTi/XTi-5 and Qolsys
  • Material Life: Typically 2 years

Product Programming:

  • Use the AirFX Add a Sensor interface or the panel interface to add the bed sensor to the account. Set the New Sensor Information as shown in the chart to the right. For enrolling the sensor at the panel, the sensor can be tampered with by pressing and holding the red button on the transmitter box for 5 seconds, until the red LED illuminates, and then releasing the button. Please note that a sensor in group 40 may sound like a special chime if the option is turned on. In most cases, the panel will default the special chime to off. Refer to the panel instructions to ensure that the special chime is turned off if you do not wish for the chime to sound when the bed is vacated. In special cases where turning off the special chime functionality is not desired, the bed sensor can be learned into group 27, however, this is not the optimal configuration.
  • After the sensor is added to the system, change the sensor type to Occupancy by doing the following: From the Equipment page of the Dealer Website click Change to the right of the sensor's name. Select the Change Sensor Type action, and update the new sensor type to Occupancy.
    • Sensor ID Select an unused ID
    • Group 40
    • Sensor Name Any
    • DL Code Inside the battery compartment of the transmitter

Product Installation:

  1. Locate the sensor within 100 feet of the base station.
  2. Place the sensor on top of a mattress and below the sheets with the dark blue side facing up. The sensor should be positioned directly under the hip area when an individual is lying down. The sensor should be placed horizontally across the bed. It is recommended that the bed sensor is placed under a thin mattress pad to improve comfort.
  3. Tuck the transmitter and any excess cable between the mattress and box spring.
  4. To test the bed sensor, apply weight directly above the mat for several seconds and release. View the Event History page on the Dealer Website to confirm the sensor activity.




Shipping & Delivery

We ship from Canada with typical delivery times of 2-5 days to major centers. Most orders over $100 before tax ship FREE.