Skip to content Bed Sensor System with DSC Alarm Transmitter

Original price $179.00 - Original price $179.00
Original price
$179.00 - $179.00
Current price $179.00

Bed sensor system with DSC transmitter for senior living and secure independent homecare. It offers a crucial safety net and is clever enough to measure the overall quality of life. It gives caretakers immediate access to information about each client's current circumstances as well as any prospective emergency issues by using covert wireless sensors placed throughout the living areas of your home.

This device requires an account, your partner will need to work with you to add devices to your account.

Alarms247 offers DIY monitoring packages to support these devices.

Wellness Monitoring:

  • Nighttime Falls
  • Sleep Patterns & Sleeplessness
  • Sedentary Lifestyles or Wandering
  • Odd & Erratic Eating Habits
  • Infrequent or Excessive Bathroom Activities
  • Medication Adherence

Product Specifications:

  • Mat Dimensions (L x W x D): 30 x 11 x 0.3 in.
  • Cable: Gray, 18in, 26 AWG, 4 conductors sheathed, terminated with RJ9 connector
  • Electronic Enclosure: White, 3.5 in. x 2.5 in. x 0.8 in. ABS plastic
  • Electronic Signaling: Battery-powered filter circuit with integrated 433 MHz (crystal-controlled) DSC-compatible transmitter with 64-minute supervisory interval
  • Activation Weight: Minimum 50 lb. subject directly above the mat.
  • Sensing Interface: Filtered, normally open (i.e. when not occupied), momentary contact switch
  • Compatibility: DSC
  • Material Life: Typically 2 years

Product Programming:

  • Use the AirFX Add a Sensor page or the panel interface to add the bed sensor to the account. Set the New Sensor Information as shown in the chart to the right. For testing, the sensor can be tampered with by pressing and holding the red button on the transmitter box for 5 seconds, until the red LED illuminates, and then releases the button.
  • After the sensor is added to the system, change the sensor type to Occupancy by doing the following: From the Equipment page of the Dealer Website, click Change to the right of the sensor�s name. Select the Change Sensor Type action, and update the new sensor type to Occupancy.
    • Sensor ID Serial Number (ESN)
    • Zone Definition 26
    • Sensor Name Any
    • Serial Number Inside the battery compartment of the transmitter

Product Installation:

  1. Locate the sensor within 100 feet of the base station.
  2. Place the sensor on top of a mattress and below the sheets with the dark blue side facing up. The sensor should be positioned directly under the hip area when an individual is lying down. The sensor should be placed horizontally across the bed. It is recommended that the bed sensor is placed under a thin mattress pad to improve comfort.
  3. Tuck the transmitter and any excess cable between the mattress and box spring.
  4. To test the bed sensor, apply weight directly above the mat for several seconds and release. View the Event History page on the Dealer Website to confirm the sensor activity.


Shipping & Delivery

We ship from Canada with typical delivery times of 2-5 days to major centers. Most orders over $100 before tax ship FREE.